ITEM(S) IN CART 0

New FPR bracket for EG/DC2 and EK now available

Posted by on 3/31/2016 to Product News
New FPR bracket for EG/DC2 and EK now available
New FPR bracket for EG/DC2 and EK now available. A quick and simple way to mount your FPR on your shock tower using UCA nuts.

New GSR / B18C1 Upper Coolant Housing

Posted by on 3/24/2016 to Product News
New GSR / B18C1 Upper Coolant Housing
New GSR / B18C1 Upper Coolant Housing. We have received many requests to make more B-series parts and are excited to offer a couple new pieces. Our GSR Upper Coolant Housing comes in two options Basic or With Filler. You then have the option to use the fitting to match the hoses you're using. The overflow fitting on the filler option can also to rotated to point any direction. These are great for tucked radiator or anyone wanting to just clean that engine bay up.

K1-Super Low Coilovers now available

Posted by on 3/23/2016 to Product News
K1-Super Low Coilovers now available
K1-Super Low Coilovers now available for the RSX/EM2/ES1/EP3, 8th Civic, and 9th Civic. These are similar to our K1-Street Coilovers but feature reduced strut body length, shorter springs, and reduced travel to give you the lowest ride possible. The RSX/EM2/ES1/EP3 Design features a straight steering arm that will help to keep the tie rods aligned and reduce chances of steering bind. The 8th and 9th gen feature an inverted rear strut with spring mounted directly on the strut. This allows greater adjustability and better fitment. Moving the spring further from the pivot point allows the spring to not work as hard and increase the movement it has. The 9th gen also feature a eccentric design in the rear which positions the top and bottom mounting locations off center to allow best fitment and not contact while lowering your car as much as possible. K1-Street - 2 " - 3.5" Drop K1-Super Low - 4-5" Drop

K1-Street Coilovers now available

Posted by on 3/23/2016 to Product News
K1-Street Coilovers now available
K1-Street Coilovers are one of the best coilovers available and anyone who's tried them can tell you how truly impressive they are. Designed to maintain comfort and solid ride for the daily street car.

New Oil Cooler Fittings and Oil Cooler Plug

Posted by on 3/3/2016 to Product News
New Oil Cooler Fittings and Oil Cooler Plug
New Oil Cooler Fittings and Oil Cooler Plug. Oil Cooler Fittings replace stock oil cooler fittings on the water pump and back of the block made of 6061 aluminum. Oil Cooler Plug can be used on either port when removing oil cooler or water pump. The 3/8NPT port can be used to run sensors or coolant for things like turbos.