New K1-Street Coilovers for 92-01 Prelude

Posted by on 1/31/2018 to Product News

Now available K1—Street Coilovers for 92-01 Prelude. Like all K1 Coilovers they come with 32 way dampening.

New 2016+ Civic Coupe/Sedan K1-Street Coilovers

Posted by on 1/30/2018 to Product News

New 2016+ Civic Coupe/Sedan K1-Street Coilovers. These won't fit Si, Type R, or hatchback.

New EVAP/Purge plug

Posted by on 1/18/2018 to Product News

New EVAP/Purge plug for 02-04 RSX and EP3 stock TB and aftermarket that run the same evap sensor.

Now available Hasportmounts rear mount for the 16+ Civic

Posted by on 1/18/2018 to Product News

Now available @hasportmounts rear mount for the 16+ Civic. Must have when running our FK8 Type R downpipe. Oem mounts are just too soft.

K-Series Fuel System

Posted by on 12/23/2017 to Product News

Our K-Series Fuel System are designed for EP3, RSX, 8th Civic Si, and 9th Civic Si. It's everything needed to replace stock fuel rail and lines inside the engine bay. You can buy the fuel lines only for those wanting to upgrade for people already using our fuel rail. Available in side Feed with optional center mount gauge or Center Feed tucked fuel line setup.

New Suspension Covers Now Available

Posted by on 12/22/2017 to Product News

All new Suspension Covers now available. Must have for those wanting to keep their suspension clean especially if your car sees winter. They use Velcro and drawstring to keep installation simple. Measure 14" long and 3.5" ID.

New K2-Circuit Coilovers

Posted by on 12/21/2017 to Product News

Our K2-Circuit Coilovers are a great option for those wanting something more aggressive than our K1-Street Coilovers. Standard Swiftsprings on every set and custom spring rates available. Available for 1992-2015 Civic, 1994-01 Integra, 2002-06 RSX.

New Type R T-Shirt and Premium Fleece Hoodie

Posted by on 11/28/2017 to Product News

New Type R T-Shirt and Premium Fleece Hoodie now available. You can find these on our website in sizes Small to 3XL.

New Fastguyracing / K-tuned SFWD Skateboard

Posted by on 11/22/2017 to Product News

New Fastguyracing / K-tuned SFWD Skateboard now available. We have limited numbers with different top layers (Black, blue, yellow, pink, and natural). From now till the end of this weekend for anyone who orders on our you'll receive a free shirt. If you want to get a specific color top layer order soon.

New suspension parts now available

Posted by on 11/21/2017 to Product News

A bunch of new suspension parts now available. Roll Center / Extended Tie Rods for 2006-11 Civic. Front compliance bushings for EM2/EP3/DC5/8th Gen/. Rear trailing arm bushings for EM2/EP3/RSX/8th Gen /9th Gen.

Rear Camber Kit & Rear Toe Adjusters for 10th base and Si

Posted by on 11/17/2017 to Product News

Now available for the 10th Gen owners. Rear Camber Kit for 10th base and Si (doesn't fit Type R). Also Rear Toe Adjusters for 10th gen including Type R.

New FK8 Type R downpipe now available

Posted by on 11/16/2017 to Product News

All new FK8 Type R downpipe now available. These are full 304 Stainless Steel construction. They're a full 3" piping from turbo to exhaust. We've seen 15whp and 15tq in the rev range. Peak of 10whp. This is all without any tuning. We're hopeful tuning will be available soon. There is no cat and we've not had a problem including a day at the track without getting a CEL.

Beanie now available just in time for the cold weather

Posted by on 11/13/2017 to Product News

Just in time for the cold weather. It may be getting cold and cars might be put away but no need to stop representing. Two styles available Beanie wtih pom pom Skull Cap / Fitted Beanie

Quick Release Door Hinges

Posted by Sean on 11/8/2017 to K-Tuned News

We have seen a lot of discussion recently regarding doors flying off at WCF this past weekend. We have also seen that our quick release door hinges have come up in the conversation a few times. We want to make it very clear that there are many cars running our door hinges on race days without any problems including SpeedFactory Tuning & Fabrication 200+MPH Outlaw Civic. It is very important to note that the car doors must be adjusted and fitted perfectly and tight in the door frame of the chassis. Failure to do so could leave gaps where air can start to pull the door away from the frame. Proper fitment is even more crucial because lexan windows and window latches (to hold in the top of the door) are not allowed in many classes.

New oil lines and turbo fittings now available

Posted by on 9/28/2017 to Product News

New oil lines and turbo fittings now available. Lines are available from 12" to 48" long. Comes in straight/90 degree options. These are great for turbo feed, remote oil switch or sensor, or overflow lines. Oil restrictors are crucial for turbo cars to keep oil pressure set properly and not ruining seals.

New FPR Bracket For K-Tuned Fuel Rail

Posted by on 9/6/2017 to Product News

For those wanting to to mount your FPR on your K-Tuned Fuel Rail we got you. New mount comes with steel bracket to support the FPR and take the stress off the fitting. It uses a custom fitting sealed with double o-ring to ensure no leaks and allows the fpr to be rotated.

Two styles of keychains now available

Posted by on 9/3/2017 to Product News

Two styles of keychains now available. Original rubber keychain or new short lanyard style with carabiner.

New ZDX/J37 to mustang bolt pattern adapter now available

Posted by on 8/31/2017 to Product News

New ZDX/J37 to mustang bolt pattern adapter now available. For those guys wanting to run big race manifolds like our Side Feed or Center Feed manifold in their 8th Gen / 9th gen etc that need to use electronic throttle body. O-ring seal on the back and thermal gasket included as well as hardware.

New K-Tuned Ground Straps Now Available

Posted by on 8/16/2017 to Product News

New K-Tuned Ground Straps. With the success of our tucked engine harness and seeing some ugly grounds we knew what had to come next. These come in a set of two. One for transmission and one for engine. They're 11" long and use M6 bolts. It's a quick and easy install and a VERY important part of your car. Poor grounds can cause countless problems. Replace those corroded grounds now.

All new K24 Post Mount Now Available

Posted by on 8/16/2017 to Product News

All new K24 Post Mount. We've received so many requests to offer our current K24 post mount without the extra holes needed for our Side Mount Pulley Kit and today is the day. The new design is lighter and sleeker. It can be used with OEM auto tensioner without a problem. We include mount bolts and both threaded holes are HeliCoiled to reduce the risk if stripping.

New S2000 front and rear camber kit now available

Posted by on 7/27/2017 to Product News

New S2000 front and rear camber kit now available.

New CMC reservoirs! Available for S2000, EG, EK, and DC2

Posted by on 6/21/2017 to Product News

New CMC reservoirs! Available for S2000, EG, EK, and DC2

Now available in a very limited quantity Downstar edition pink fuel rail

Posted by on 6/15/2017 to Product News

Now available in a very limited quantity Downstar edition pink fuel rail. We did a small run to show love for the new build from Frank_downstar. Anodized in pure pink haterade. Only available on our website. Not available through dealers due to the small quantity.

New B/D Pro-Circuit 2 Shifter!

Posted by on 5/11/2017 to Product News

New B/D Pro-Circuit 2 Shifter! This shifter moves the knob closer to the driver further from the dash. These will start shipping Monday. Uprades are available for those interested.

All new hats. Available in Flexfit or Snapback.

Posted by on 4/21/2017 to Product News

All new hats. Available in Flexfit or Snapback.